5V Mini TrainUPS constrant voltage supply
Battery backed up MiniTrainUPS 5VDC regulated power supply, ideal for powering LED train lighting, small on board computers or any other functions that needs reliable constant voltage power.
Mini TrainUPS consists of a double regulator high efficiency charging system with regulated 5 VDC 1A output and a 6 cell 2300 Mah battery pack. Charges from and 'floats' on any track voltage from 14 to 28V, AC, DC or DCC. Ideal for LED train lighting and computer power. This is the same power subsystem we use in our DVRAC. Charges and supplies 5VDC while the unit is on track power of 14V or greater, goes into UPS mode when the train is on unpowered track. Will supply a regulated 5VDC output at up to 1 Amp for over 2 hours with no track power present. 1 Amp at 5VDC will power up to 50 LEDs, more than enough to light your longest passenger train. Recharge time (fully discharged) is 5 hours.
Electronics unit is located in a 3x2x1 inch box, battery dimensions are 3.5x2x.75 inches. Battery is located on a detachable pigtail and may be located up to 20 inches away from the electronics unit if desired. May be installed in any unit with track power pickups. Track current draw is under 500ma at full rated output on 20V track power.
This is a special order item with a 5 day lead time
Battery data sheet (link will open in new window)
- What is it?: On board Battery backed 5VDC power supply
- Run time: Indefinate on power track, over 2 hours on unpowered track.
- Battery Life: 500 full charge cycles (16 months of daily operation!)
- Dimensions: Electronics unit 3x2x1 Inches, Battery 3.5x2x.75 Inches
- Power: Requires 14 to 28 V track power to charge battery.
- Skill level: Moderate, soldering to track pickups
- Supports: Up to 50 LEDs
- Condition: New
- Product type: G scale Model railroad
- Item #: MINITUPS
