The bridges use the Santa Fe Albuquerque Division (second district) A frame signal bridges as their prototype and are available with a variety of APC searchlight heads, both single and double. Single color light APC heads are also avilable in various configurations. The first photo shows one of our prototypes before final details (ladder, cable pipes, etc) and signals have been added.  The second photo shows a bridge with single heads being used to protect an interlocking.

These bridges are very rugged and will take anything the outdoors can throw at them (heat, cold, rain, snow, etc.) and will last for years. The signal bridge is available in both two and three track widths.

The basic bridge has no heads mounted, The two track ABS bridge has one head per track, on opposite sides and the CTC style bridge has 4 (two track) or 6 (three track) single heads mounted, one for each track in each direction.

The basic bridge is designed to use our signal standard mounted bridge heads if you would like to build your own custom head configuration.  Each track has two stud mounts, one in each direction.  Adding a signal standard is a simple matter of slipping the standard over the stud mount, securing it with a drop of epoxy and routing the wires through the conduits on the bridge.  Order signal standards separately.

If you're not planning on setting your bridge in concrete we offer optional 8" long brass stock 'footers'  that bolt on to each side of the base of the bridge to provide stability in high winds.

Each signal bridge is built by hand to your specifications, there is a 60 day lead time on all brass signal bridges.